Status; To Wash Clothes - Speed Queen AFNE9RSP113WH User Manual

the Delay Start keypad again to increase the time by one hour each
press. Press the Start/Pause keypad to begin the countdown.
While setting the Delay Start Option, the cycle time and the Delay
Start keypad light will flash (1 second on/off).
After the Delay Start Option is started, the Delay Start keypad
light will flash (1 second on/off).
Signal
Pressing the Signal keypad will change the end of cycle signal vol-
ume. There are four settings: Off, Low, Medium, High.
Control Lock (Secure keypad)
Pressing and holding the Signal keypad for three seconds will turn
on the Control Lock. The Control Lock status light will be lit. While
Control Lock is on, no other keypad presses are allowed. Press and
hold the Signal keypad again to turn the option off.

Status

The Status lights are lit during the cycle to show what part of the
cycle is running.
Wash
Rinse
Spin
Door Lock
While the door is locking, the door lock status light flashes (1 sec-
ond on/1 second off). While unlocking, the door lock status light
stays lit and the cycle time flashes (1 second on/1 second off).

To Wash Clothes

©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
The Wash status light is lit
during the wash portion of the
cycle including Pre-Wash and
Soak, if selected.
The Rinse status light is lit
during the rinse portions of
the cycle including Second
Rinse and Third Rinse, if selec-
ted.
The Spin status light is lit
during the final spin portion of
the cycle.
The Door Lock status light is
lit whenever the door is locked.
The door cannot be opened
while it is lit.
IMPORTANT: Before using your new washer, make sure
the washer cord is connected to an appropriate electrical
outlet that is properly installed and connected to a pro-
tective earth/ground. Make sure the washer hoses are
connected to the hot and cold water faucets, and that the
faucets are turned on. Be sure the drain hose is not
kinked and is inserted into a drain. Refer to the INSTAL-
LATION INSTRUCTIONS for details of proper washer in-
stallation.
IMPORTANT: Prior to first wash, use an all purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside of wash drum.
1. Get the clothes ready for washing. Empty pockets and cuffs.
Sort items into separate loads. Pretreat stains and heavily
soiled areas.
IMPORTANT: Remove all sharp objects from laundry
to avoid tears and rips to items during normal ma-
chine operation.
2. Measure and add low sudsing, high efficiency (HE) detergent,
fabric softener and bleach to the dispenser drawer. Refer to
section on Using Your Dispenser Drawer. Follow instructions on
detergent package for amount to use.
13
Control Panel
TLW1991N_SVG
FLW2308N_svg
Part No. 804648R4