Table of Contents
Advertisement
8
Getting started
Getting started
Plug in and set up your Acer Chromebase
Open the stand until it snaps in place. Then, tilt the display panel to an
angle of between 15 and 75 degrees from an upright position.
Connect the DC-in jack to your Acer Chromebase and plug the AC adapter
into an AC outlet.
Turn on your Acer Chromebase
On the Acer Chromebase, the power button is located in the lower-right
corner beneath the screen. A "connect" screen will appear when the Acer
Chromebase first boots up.
Using the touchscreen
Your Acer Chromebase uses a touchscreen for selecting items and
entering information. Use your finger to tap the screen. You may use the
following gestures:
Hide quick links:
Advertisement
Table of Contents
