Attaching The Table-Top Stand - Sony Bravia KDL-60R510A Operating Instructions Manual

Attaching the Table-Top Stand
...................................................................................... ii_ jiiiiiii;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_;_ ........................................................................................................................................................................................ ....................................................................................................... ..........................................................................................................................
Refer to the supplied Table-Top Stand instruction leaflet for proper attachment.
• Be careful to not pinch your hands or the AC power cord when you install the TV set to the Table-
Top Stand.
1 Place the TV set on the Table-Top Stand.
2
®
Fix the TV to the Table-Top Stand using the supplied screws. The arrow marks
indicate the location of the screw holes used for securing the Table-Top Stand.
• Hold the TV with one hand to avoid it dropping when attaching.
,/ X
• Align the TV from the top, slide it in until the guide pins cannot be seen.
• If using an electric screwdriver, set the torque at approximately 1.5 N.m {15 kgf.cm}.
• When detaching the Table-Top Stand, reverse the attaching procedure. Do not remove any
screws other than those used when attaching the Table-Top Stand.
6