Attaching The Table-Top Stand (Alternative) - Sony XBR-75X910C Reference Manual

Attaching the Table-Top
Stand (Alternative)
You can change the Table-Top Stand from
the edge to the middle position by referring
to the instructions below.
Middle position
Note
• Two or more people are needed to carry out this
installation.
• Be careful not to pinch the finger during
installation.
XBR-75X910C/65X900C
1
Thick cushion
1.5 N∙m/1,5 N∙m
{15 kgf∙cm}
2
14
US
XBR-55X900C
1
Remove the lower screws, and then
one of the Table-Top Stand.
2
Attach the stand plate (supplied
with the TV) to the detached Table-
Top Stand.
3
Fix the stand plate to the Table-Top
Stand with screws (M5×10) (supplied
with the TV).
Soft cloth
Stand plate
1.5 N∙m/1,5 N∙m
{15 kgf∙cm}
M5 × 10