Method 2: Directly Executing Installer Program; Method 3: Plug And Play - Asus V9520 Home Theater User Manual

Method 2: Directly executing installer program

1. Boot your computer.
2. Insert the support CD into the CD-ROM drive.
3. Run the setup utility from support CD from the following path :
\Win9xMe\ANVSetup.exe
4. From the autorun screen, click Drivers then click Install ASUS
Enhanced Driver on the Drivers dialog box.
5. Follow the succeeding instructions from the dialog box and reboot
system after installation is complete.

Method 3: Plug and Play

Before proceeding with the following steps, replace your old VGA card
with an ASUS graphic card.
1. Boot the computer.
2. When Windows detects your
ASUS graphics card, the New
Hardware Found dialog box
appears.
3. Click Driver from disk provided
by hardware manufacturer.
4. The Setup prompts you for the location of the driver, type the following
path:
D:\WIN9xMe
to direct Setup to the INF file, then click Finish to install the driver.
5. When Setup has finished installing all the necessary files to your
computer, it prompts you to restart your computer. Click Yes to restart
your computer and to complete setup.
ASUS V9520 Home Theater User Guide 7