To Steam Drapes And Curtains; Cleaning And Storing; Decalcification - Conair CGS95A Instructions For Use Manual

TO STEAM DRAPES AND CURTAINS

Wash and dry as directed in the instructions of your drapes and
curtains. Re-hang drapes/curtains and then steam when in place.

CLEANING AND STORING

1. Turn the On/Off switch to the Off position and unplug from the
power source.
2. Wait for the steamer to cool completely for at least 30 minutes.
3. Remove the water tank from unit, open bottom cover and empty
unused contents. Allow to air dry.
4. Collapse telescopic hanger pole.
5. Replace water tank.
6. Store the unit.

DECALCIFICATION

If the appliance begins to produce steam more slowly than usual
or stops producing steam and then starts again, you may need
to decalcify your steamer. Decalcification refers to removing the
calcium deposits that form over time on the metal parts of the
steamer. For best performance from the Conair
Fabric Steamer, decalcify the unit once a month. The frequency
depends upon the hardness of your tap water and how often you
use the steamer.
To decalcify, add a solution of 1/3 white vinegar and 2/3 water
in the water tank. Place the water tank in the unit. Plug the
unit into electrical outlet. Turn to the On position and run until
half the amount has steamed (1 liter). Turn the unit to the Off
position, unplug from electrical outlet, and allow to sit for
30 minutes.
CAUTION: Hose will be hot when
in use. Avoid prolonged contact.
®
Extreme Steam
™