Table of Contents
Advertisement
･ Clean the terminals occasionally with a
dry cotton swab.
If the jack is soiled, connection gets worse and
it may cause power to be turned off or
insufficient battery charge, so clean the jack
with a dry cotton swab etc. When cleaning, be
careful not to damage the terminals.
･ Do not leave the terminal near the air
conditioning vent.
Extreme temperature changes may produce
condensation and corrode the internal parts of
the terminal, causing it to malfunction.
･ Make sure to use the terminal or battery
pack without excessive force.
If you put the terminal in a bag full of items or sit
down with the terminal in the pocket of your
cloth, it may damage the display, and internal
circuit board, and the battery pack and cause
the terminal to malfunction.
Also, while the external device is connected to
the microUSB connection jack or headset
connection jack, it may damage the connector
and cause malfunction.
･ Do not rub or scratch the display with
metal.
The display may get scratched and it may
cause malfunction or damage.
･ Make sure to see the user's manuals
supplied with the battery pack and AC
adapter cable.
■
The terminal precautions
･ Do not press touch panel surface
forcibly, or not operate with a sharp-
pointed objects such as nail, ballpoint
pen, pin, etc.
Doing so may cause damage of touch panel.
･ Do not use the terminal in extremely hot
or cold places.
Use the terminal within a temperature range of
5°C to 35°C and a humidity range of 45% to
85%.
･ Using the terminal near ordinary phone,
television or radio may cause
interference in these electric
appliances. Make sure to move far away
from them when using the terminal.
･ Note down the information saved in the
terminal in a separate note and keep it
safely.
Under no condition will DOCOMO be held
liable for any damaged or lost data saved in the
terminal.
･ Do not drop or give a strong impact to
the terminal.
Doing so may cause malfunction or damage.
･ Do not plug the connector of the external
device into the microUSB connection
jack or headset connection jack at the
slant or pull it while connecting.
Doing so may cause malfunction or damage.
Contents/Precautions
Continued on next page
19
Advertisement
Table of Contents
