Selecting A Location - Miller Electric Dimension 1000 Owner's Manual

4-4. Selecting A Location

Movement
Location And Airflow
3
OM-2223 Page 14
1
OR
18 in
(460 mm)
1 Lifting Eye
2 Lifting Forks
Use lifting eye or lifting forks to
move unit.
If using lifting forks, extend forks
beyond opposite side of unit.
3 Rating Label
Use rating label to determine input
power needs. Label located under
front access door.
4 Line Disconnect Device
2
Locate unit near correct input pow-
er supply.
!
Special installation may be
required where gasoline or
volatile liquids are present −
4
see NEC Article 511 or CEC
Section 20.
18 in
(460 mm)