Barcode Scanner Module; Configuring Barcode Reader Settings - Opticon H-27 User Manual

Barcode Scanner Module

This device is equipped with a barcode scanner module which supports many of the
popular barcode formats currently used worldwide.
NOTE: During the system initialization (after powering on the device for the first time
or resetting the device to factory default), the scanner will take approximately
30 seconds to be activated. It is highly recommended not to press the barcode
scan trigger key within 30 seconds.

Configuring Barcode Reader Settings

Before scanning a barcode, configure the scanner settings.
1. On the Home screen, touch
Barcode Reader.
2. Touch one of the following options:
• Barcode reader: Check the box to enable
barcode module function.
• Prefix Suffix settings: Configure the prefix and
suffix characters.
• Code readable settings: Configure the code
readable settings.
• Code options: Configure the code options.
• Read options: Configure the read options
including read mode, read time, margin,
redundancy, positive and negative, and scan angle settings.
• Output mode: Select the output mode.
• Intent mode settings: Set the intent action and
category.
• Trigger button: Specify which button(s) to be
used as trigger key(s).
• Handle barcodes with URI content: Enable
URI content support.
• Restore factory default settings: Return all
barcode reader settings to the factory default
settings.
• Backup current settings: Back up the current
barcode reader settings.
• Restore settings: Restore the current barcode reader settings.
APPLICATION AND OPERATION: Barcode Scanner Module
> Settings >
51