Opticon H-27 User Manual page 58

APPENDIX: Specifications
Standby time
Speaker
Receiver
Microphone
I/O
Power Adaptor
Dimension
Operating temperature
Storage temperature
Charging temperature
Humidity
Sealing
Drop specification
Electrostatic Discharge
(ESD)
*Design and specifications are subject to change without prior notice.
54
H-27 Specifications
150 hours at WIFI turned off & 3G turned on
1 x Internal (0.5W) more than 80 dB SPL at 1m
1 x Internal, add HAC compliant receiver
1 x Internal
• 1 x SIM
• 1 x Micro SD
• 1 x Micro USB female type, OTG & charging function
• 1 x Earphone jack (pin defined as Apple)
• 6 x Function key (2 physical keys)
• 1 x Power button, 2 x Volume button
NOTE: For reset function, press the Power button for
7 to 10 seconds.
• 1 x System connector, include charging function, OTG
USB function
• Input:100V to 240V AC at 50/60Hz, 0.8A
• Output: 5V DC 3A (DC-plug)
NOTE: Micro USB male type only supports 1.5A
• AC Cable
• Certification: UL, FCC, CE, PSE & BSMI, +/-2KV surge
test
77 mm (W) x 147 mm (L) x 19.9 mm (T)
o o
-10 C to +50 C
o o
-20 C to +70 C (without battery)
o o
0 C to +40 C
5% to 95% RH (no condensation)
IP65 per applicable IEC sealing specifications
Multiple 1.5 meters(4 feet) drop to concrete, 6 faces, 6
times per face, at 25 degree C operating temperature
• +/- 15kVdc air discharge at could be reboot
• +/- 8kVdc direct discharge at could be re boot