Electrical Safety; Personal Safety - Terratek TBG6 User Manual

6” heavy duty bench grinder
Table of Contents

Advertisement

Available languages

Available languages

Electrical safety

Before use. ensure that the power outlet you are using matches the plug on your
power tool and that the voltage of the outlet matches that of your power tool.
Only use grounded extension cards with power tools fitted with 3 pin plugs and if
using outdoors ensure any extension cord is suitable for outdoor use.
Always try to avoid body contact with grounded surfaces, such as radiators, cooking
ranges and any other fixed appliance with metal surfaces.
Do not expose your power tool to wet or damp conditions and NEVER use in rain.
Check regularly the power cord of your machine and any extension cord that you are
using for damage.
Do not carry or pull the machine with the power cord.
Ensure the cord is clear from hot surfaces, oil or sharp objects.

Personal safety

Never use your machine whilst under the influence of alcohol, drugs or medication.
Tiredness can often cause accidents, stay alert.
Never use your machine without the correct guards in place.
Always use ANSI approved eye protection and dust mask. Non slip safety shoes and
hearing protectors should be worn at all times when using your power tool.
Ensure any dust collecting device supplied with your machine is connected correctly
before use.
Ensure all loose clothing, long hair or jewelry is kept clear of the machine.
Before plugging your machine into the power outlet ensure the machine is in the OFF
position and that all blades and accessories being used are secure.
Check that wrenches or adjusting keys have been removed. Any wrench or key left
attached to a moving part can result in injury.
Power tool use and care.
Keep your machine clean and well serviced at all times.
Never adjust or service any power tool before disconnecting from the mains electricity
supply.
Page 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents