Table of Contents
Advertisement
Missing Parts? Please Call 800-641-6996 For Assistance
Unpacking and Assembly
- Remove heater and base from carton (save
carton and packing materials for later storage)
- Remove all protective packaging protecting
heater during shipping.
- Place heater base on flat surface with wheels
on ground.
- Line up holes in bottom of heater cabinet with
locking tabs on top of base (see figure 2)
- Mount heater cabinet to heater base, sliding
tabs through holes in bottom of cabinet and
sliding cabinet backward approximately 1/4" or
until cabinet will not move further back.
- Use thumbscrews to attach heater cabinet to
heater base.
- Inspect heater closely for any damage that may
have occured during shipping. If there is any
damage, return the heater to place of purchase.
The Propane (LP) gas
CAUTION
pressure regulator and hose
assembly supplied with the heater must be
used without alteration.
© 2015, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING,
CONNECTED TO A POWER SOURCE, OR WHILE
CONNECTED TO A FUEL SOURCE
Connecting to Gas Supply
IMPORTANT! - Always use a propane (LP)
cylinder that has a connection device that is
compatible with the hose and regulator assembly
supplied.
- Remove the back cover by sliding the cover
- To connect LP cylinder, insert regulator end
- Open valve on propane cylinder slowly. If the
- Be sure to inspect all connections for leaks, by
use. If the hose is cut or frayed, replace it
with the manufacturer suggested assembly.
5
straight up and away from the heater body.
Place the LP cylinder on the bottom plate and
replace the back cover.
fitting into cylinder valve, rotate coupling nut
clockwise and tighten firmly (see figure 3)
valve is not opened slowly, the excess flow
check valve in the regulator will stop the flow of
gas. If this should happen, close the valve, wait
one minute (or until you hear the valve click),
and re-open, slowly.
using a 50/50 mixture of dish soap and water on
all connection. Any bubbles forming indicate a
leak.
Be sure to inspect the
CAUTION
regulator hose before each
Convection Heater User's Manual
Advertisement
Table of Contents
