Airstream 1980 Argosy Owner's Manual page 75

The mixer was designed for convenience and
efficient operation. The bowl rests on a
turntable directly connected to power unit. The
motor, not the beater, turns the bowl
--
automatically keeps it revolving during mixing,
regardless of the consistency of the batter. This
feature eliminates hand-turning the bowl. And,
while the bowl revolves automatically, the
beater turns ir: the opposite direction. This
'counter-motion' feature helps prevent lumpy,
incomplete mixing.
To operate the mixer:
1
.
Place turntable in position on the power unit.
2. Lock the turntable in place by pressing the
locking lever clockwise.
3. Place the mixing bowl on the turntable.
4. Push the beater blade into the beater head.
Blade will 'click' when it's locked in
position.
5. Insert beater head shaft into center tube of
bowl. Place it in one of six positions until it
snaps into turntable.
6. Turn dial to desired speed.
Note: To remove beater head, turn
counter-clockwise, and lift it out of mixing
bowl. If the turntable should become
locked to power unit and cannot be easily
removed, insert beater head and turn it
counter-clockwise.
The blender makes meal preparation and
entertaining less work and more fun. It
performs, quickly and easily the time
consuming and tiring tasks of grating,
chopping, shredding and mincing; it even
liquifies solids and blends them to perfection
To operate the blender:
1 . Place blender in position on power unit, and
turn clockwise to lock securely in place.
Never attempt to place blender or any
other attachment in position while
power unit is running.
2. Put food in blender. Turn dial to desired
speed. O r .
. .
3. When adding solids, cover, then turn dial to
desired speed. Remove insert from lid. Add
food through opening while blades are in
motion.
4. To remove contents from blender, use a
long-handled rubber bottle and jar scraper
or a wooden spoon or fork. Don't use a
metal spatula or spoon.
The knife sharpener will allow you lo sharpen
your knives In just seconds.
To operate the knive sharpener:
1 . Place sharpener in power unit; turn
clockwise to lock in position. Be sure
sharpening stone is on left as you face the
knife sharpener.
2. Turn control dial to speed 3. Be sure knife is
clean and dry.
3. Place heel of knife blade into guide slot next
to sharpening stone (left or right). Hold knife
firmly by the handle and draw it slowly
toward you with cutting edge against stone.
Allow weight of the knife and the guide slot
to apply necessary pressure and
positioning.
4. Repeat operation, alternating to left and
right side of stone with each stroke, until
desired sharpness is obtained.
Bathroom
Don't sharpen knives with an irregular edge
such as serrated, scalloped, fluted, corrugated
or hollow edges
. . .
and don't sharpen
scissors. Don't clean sharpener while
attached to power unit. Be sure speed
control dial is turned "off" before
attaching or removing sharpener.
The lavatory bowl, counter top, tub or
shower pan in your bathroom are made of a
special ABS long-wearing, light weight, high
strength plastic material. When cleaning, use
soap or detergent only
-
never use
scouring powder. Always rewax the ABS
plastic surfaces after each heavy cleaning with
a good grade paste wax (without solvents or
cleaners). The wax will protect the surfaces
from discoloration and stains. When you first