User Profiles; Additional Functions User Profiles - Leica SL Instructions Manual

EN ADDITIONAL FUNCTIONS

USER PROFILES

With the Leica SL, any combination of menu settings can be
permanently saved, e.g. so that they can be retrieved quickly and
easily at any time for recurring situations/subjects. A total of four
memory slots are available for these combinations, as well as a
factory default setting that can be retrieved at any time and cannot
be changed. You can change the names of the saved profiles.
Profiles set on the camera can be transferred onto one of the
memory cards, for example for use in other camera units, while
profiles stored on a card can be transferred onto the camera.
Saving settings / Creating a profile
1. Set the desired functions in the menu.
2. In the menu's
SETUP
3. in the submenu
4. in the corresponding submenu, the desired memory slot.
Note:
This menu item can be assigned to the
256
SL_EN.indd 256
section, select
User Profile
, and
Load Profile
FAVORITES
Selecting a profile
This works almost the same way as when saving settings, except
that step 1. is skipped.
• After performing steps 2. and 3., if any user profiles are saved,
the profile names appear in gray, with unused memory slots in
green.
Then select the desired profile in the
either one of the saved profiles or
Note:
If you change one of the settings for the profile currently in use,
appears instead of the name of the profile you were previously
---
using in the initial menu list.
,
menu.
submenu, i.e.
Load Profile
.
Default Profile
16.09.2015 15:04:40