Dometic EA 3080 Service Manual page 32

- Lay refrigerator onto door, support if necessary (see 1.2.3).
- Remove thermostat cover. (Figure 118,119)
- Remove electrical wire from thermostat. (Figure 120)
Figure 118
- Unscrew securing screws from thermostat. (Figure 121)
- Dismount thermostat case by loosening the locking nut. (Figure 122)
- Pull out thermostat capillary from refrigerator cabinet, remove difective
thermostat.
- Reinstall thermostat case onto the new thermostat, secure with nut. During
assembly make sure that the navigation-securing pin of thermostat fits into
the bore of plate. (Figure 123)
Figure 121
- Reinsert thermostat onto panel, secure with screws
- Reassemble thermostat wires.
- Reinsert thermostat cover, secure.
- Insert thermostat capillary into cabinet approx. 200 mm deep. (Figure 124)
Figure124
Figure 119
Figure 122
32
Figure 120
Figure 123