Eco Mode - Philips XL490 User Manual

Silent mode
You can set your phone to silent mode and
enable the silent mode for a specified duration.
When the silent mode is turned on, your phone
does not ring or send any alerts or sound.
Note
•
When you press to find your handset, or when you
activate the alarm, your phone still sends alert even
when the silent mode is activated.
1
Select [Menu] > [Phone setup] >
[Sounds] > [Silent mode], then press
[OK] to confirm.
2
Select [On/off] > [On]/[Off], then press
[OK] to confirm.
» The setting is saved.
3
Select [Start & end], then press [OK] to
confirm.
4
Set the time, then press [OK] to confirm.
» The setting is saved.
is displayed.
»
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
Select [Menu] > [Phone setup] >
[Sounds] > [Key tone], then press [OK]
to confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or
charger.
1
Select [Menu] > [Phone setup] >
[Sounds] > [Docking tone], then press
[OK] to confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.
Set the battery tone
Battery tone is the sound made when the
battery is low and needs recharging.
1
Select [Menu] > [Phone setup] >
[Sounds] > [Battery tone], then press
[OK] to confirm.
2
Select [On]/[Off], then press [OK] to
confirm.
» The setting is saved.

Eco mode

The ECO mode reduces the transmission
power of the handset and base station when
you are on a call or when the phone is in
standby mode.
1
Select [Menu] > [Phone setup] > [Eco
mode], then press [OK] to confirm.
2
Select [On]/[Off], and press [OK] to
confirm.
» The setting is saved.
» ECO is displayed in standby mode.
Note
•
When ECO mode is set to [On], the connection
range between the handset and the base station can
be reduced.
ECO+ mode
When the ECO+ mode is activated, it
eliminates the radiation of the handset and base
station in standby mode.
1
Select [Menu] > [Phone setup] >Eco+
mode , then press [OK] to confirm.
EN 25