Phone Settings; Sound Settings; Set The Battery Tone; Eco+ Mode - Philips M330 User Manual

10 Phone settings

You can customize the settings to make it your
own phone.

Sound settings

Set the handset's ringtone volume
You can select among 5 ringtone volume levels
or [Off].
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] >
[Ring volume], then press MENU/OK to
confirm.
3
Select a volume level, then press MENU/
OK to confirm.
» The setting is saved.
Set the handset's ringtone
You can select from 10 ringtones.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] > [Ring
tones], then press MENU/OK to confirm.
3
Select a ringtone, then press MENU/OK
to confirm.
» The setting is saved.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] > [Key
tone], then press MENU/OK to confirm.
3
Select [On]/[Off], then press MENU/OK
to confirm.
» The setting is saved.
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or
charger.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] >
[Docking tone], then press MENU/OK to
confirm.
3
Select [On]/[Off], then press MENU/OK
to confirm.
» The setting is saved.

Set the battery tone

Battery tone is the sound made when the
battery is low and needs recharging.
1
Press MENU/OK.
2
Select [Phone setup] > [Sounds] >
[Battery tone], then press MENU/OK to
confirm.
3
Select [On]/[Off], then press MENU/OK
to confirm.
» The setting is saved.

ECO+ mode

When the ECO+ mode is activated, it
eliminates the radiation of the handset and base
station in standby mode.
1
Press MENU/OK.
2
Select [Phone setup] >[ECO+ mode],
then press MENU/OK to confirm.
3
Select [On]/[Off], and press MENU/OK to
confirm.
» The setting is saved.
» ECO+ is displayed in standby mode.
EN
21