Table of Contents
Advertisement
Leveling
To enhance the appearance and maintain performance, the refrigerator should be level.
To protect property and refrigerator from damage, observe the following:
• Protect vinyl or other flooring with cardboard, rugs, or other protective material.
DO NOT
•
use power tools when performing leveling procedure.
Materials Needed
• 1/4" hex head driver
• Carpenter's level
Note: Complete any required panel installation and/or water supply connection before leveling.
Refrigerator should be in permanent location prior to leveling.
1
Remove toe grille. Grasp firmly and pull outward
to unclip.
3
To lower the front of the refrigerator, turn the leveler foot
screw counterclockwise. Note: It may take several turns
of the leveler foot screw to adjust the tilt of the
refrigerator.
2
To raise the front of the refrigerator, turn the leveler foot
screw clockwise. Note: Having someone push against the
top of the refrigerator takes some weight off the leveler
foot screws.
4
Replace toe grill. Align the toe grille mounting clips
with the lower cabinet slots. Push the toe grille firmly
until it snaps into place. Check for level.
16
Advertisement
Table of Contents
