Table of Contents
Advertisement
The "Freezer" symbol and the alarm off
sensor will flash until the freezer section
has cooled down to the correct
temperature for freezing.
The appliance will start to cool, and the
interior lighting will come on when the
refrigerator section door is opened.
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer
section until the temperature is at
least -18 °C.
This sensor is used to switch between
the refrigerator and freezer sections.
If you want to select the freezer section
(to check the temperature, for
example),
^ touch the sensor for switching
between the refrigerator and freezer
sections until the "Freezer" symbol
lights up yellow.
Depending on which section you have
selected, you can
– select either the Super cool or Super
freeze function, or
Switching on and off
– adjust the temperature.
Please refer to the relevant section for
more information.
Cool pack
Place the cool pack in the top drawer of
the freezer section. The cool pack will
be at its most effective after it has been
in the freezer for approx. 24 hours.
Switching off
^ Touch the On/Off sensor until all of
the indicators go out. (If this does not
happen, the safety lock is still
activated).
If the refrigerator section is switched
on, then the refrigerator section and the
freezer section will switch off one after
the other.
The interior lighting will not come on
when you open the door and the
cooling process will be switched off.
19
Hide quick links:
Advertisement
Table of Contents
