Replacing the upper soft-close door
mechanism
^ Remove cover a from panel b,
rotate it by 180° and refit it on the
other side.
^ Clip the spacer into position on the
handle side (A).
^ Then clip the soft-close mechanism
into position on the hinge side (B).
Then push both parts from the
middle until they click firmly into
position.
Changing the door hinging
^ Screw the spacer and the soft-close
mechanism together securely using
screw c.
^ Attach panel b to soft-close
mechanism bracket d.
^ Push cover e on from the side so
that the openings for the pin f are
vertically aligned.
^ Align bracket d to the hinge plate,
and insert pin f from above so that
the right angle fits into the recess.
^ Clip cover e into position.
Make sure that cover e fits properly so
that the door can be closed without
hindrance and the pin is protected.
79