Setting The Clock - Sangean DT-250 Operating Instructions Manual

Setting the Clock

This radio features a clock that will display
the current time while radio is off.
To set the clock:
1. Turn radio off.
2. Press and hold MEMO/CLOCK button until
the hour setting begins blinking and the
colon is no longer blinking.
3. Select hour by pressing the Tuning
Controls ( UP/Down ) button until desired
hour is displayed.
4. Press MEMO/CLOCK button again to set
the minutes.
5. The minute indicators should now be
blinking. Using the Tuning Control buttons
( UP/Down ) until desired minutes
is displayed.
6. Press MEMO/CLOCK button again to
complete time setting.
7. Time should display solidly with the colon
blinking periodically.
GB
10