Information Interface; Advanced Interface - Guangzhou Liwei Beam 200W SHARPY 5R User Manual

Display NO
Power Save
OFF
Burn on start OFF
up
NO
Load Default

2.3. Information interface

Option
Total using time
The use of time
System error logs
After you finish view,
2.4. Manual control interface
This interface use to control present light, neither belong to the from the machine state (didn't received
DMX signal), nor belong to Host state( send DMX signal).
option
Reset
Color wheel
......
the speed of gobo
wheel
Blub control

2.5 Advanced interface

Password is "Up down up down " . For the runner , password is "Left right left right"
Guangzhou Best Stage Light Equipment Co.' Ltd
Free 30 seconds after closing backlight
Backlight ever bright
Power on directly after reset, no light bulb (need to use the menu
or control table to manual light bubble)
After power on automatic light bubble, must wait for the light bulb
light up success can be reset
Press ok key see the confirmation dialog box, again press ok key,
Press OK key into edit
instruction
Cumulative using time (Accuracy to the minute)
Use of time since the boot (Accuracy to the minute)
If the red indicator shine ,that mean the lamps runs error . The details can
be entered sub-interface to view
you can press the "OK" key to make the error log empty. Pay attention:
Sometimes not the Hall or optical coupler installation problems, But the
motor cable is connected backwards
instruction
Press ok key see the confirmation dialog box, again press ok key, enter the
reset interface, all motor reset.
0-255 Press OK key into edit state, its selected hundred. Press up
or down,change channel value .Press again OK key,
0-255
selected ten editor. Press again OK key, select the edit.
0-255
Press it again to exit the edit state.
ON
OFF
4