Summary of Contents for Guangzhou Liwei Beam 200W SHARPY 5R
-
Page 1: User Manual
Guangzhou Best Stage Light Equipment Co.’ Ltd BEAM 200W SHARPY 5R User Manual Please read this user manual carefully before operate it... -
Page 2: Operation
Guangzhou Best Stage Light Equipment Co.’ Ltd At first , thanks for purchase our pro lighting products. This user maunal include how to safely for installations and use of the important informations. Please carefully read the requirements of installation and operation . At the same time, please return this user manual properly preserved, for a rainy day. -
Page 3: Interface Description
Guangzhou Best Stage Light Equipment Co.’ Ltd 6. After modification, press turn wheel and then loosen, out of the editing state. 7. Turn the wheel select “back”, press turn wheel and then loosen, back into the main interface. Interface description 2.1 Main Interface Top right corner 3 button for language switching and screen rotation Bottom row four button corresponding sub interface is introduced, it’s in the back. -
Page 4: Information Interface
Guangzhou Best Stage Light Equipment Co.’ Ltd Free 30 seconds after closing backlight Display Backlight ever bright Power Save Power on directly after reset, no light bulb (need to use the menu Burn on start or control table to manual light bubble) After power on automatic light bubble, must wait for the light bulb light up success can be reset Load Default... - Page 5 Guangzhou Best Stage Light Equipment Co.’ Ltd Touch operation : Press one time on the “up” key (Appear the first “*” ),Then press one time on the “down” key (Appear the second “*” ) , Press one time on the “up” key again (Appear the third “*” ) , Press one time on the “down”...
- Page 6 Guangzhou Best Stage Light Equipment Co.’ Ltd...
- Page 7 Guangzhou Best Stage Light Equipment Co.’ Ltd...
- Page 8 Guangzhou Best Stage Light Equipment Co.’ Ltd...
- Page 9 Guangzhou Best Stage Light Equipment Co.’ Ltd...
- Page 10 Guangzhou Best Stage Light Equipment Co.’ Ltd...
- Page 11 Guangzhou Best Stage Light Equipment Co.’ Ltd Control signal wire connection Use the CLR-XLR controller line connect every light’s DMX input port from controller’s DMX input port, and start from the first light’s DMX input port connect to the second light’s DMX input port, in this way, until connect all of the lights, and then use the loop accompanied connect to the last light's signal input port the connect complete, as the follow picture: Note...
-
Page 12: Maintenance
Guangzhou Best Stage Light Equipment Co.’ Ltd Three core canon plug DMX512 interface circuit Maintenance a. If the light’s lens damaged or broken, and should need change the new lens, if the bulb damaged or have any deformation, make the light dim, it says that the bulb had run out of it’s life., should change in time.
Need help?
Do you have a question about the Beam 200W SHARPY 5R and is the answer not in the manual?
Questions and answers