Wds Ap Status; Roaming - Draytek VigorAP 910C User Manual

AP's SSID
Add
3 . 7 . 3 W D S A P
3 . 7 . 3 W D S A P
VigorAP 910C can display the status such as MAC address, physical mode, power save and
bandwidth for the working AP connected with WDS. Click Refresh to get the newest
information.
3 . 7 . 4 R o a m i n
3 . 7 . 4 R o a m i n
The network signal for a single wireless access point might be limited by its coverage range.
Therefore, if you want to expand the wireless network in a large exhibition with a quick
method, you can install multiple access points with enabling the Roaming feature for each
AP to reach the purpose of expanding wireless signals seamlessly.
These access points connecting for each other shall be verified by pre-authentication. This
page allows you to enable the roaming feature and the pre-authentication.
Available settings are explained as follows:
Item
PMK Cache Period
Pre-Authentication
VigorAP 910C User's Guide
To specify an AP to be applied with WDS settings, you can
specify MAC address or SSID for the AP. Here is the place
that you can type the SSID of the AP.
Type the MAC address of the AP. Click Add. Later, the MAC
address of the AP will be added and be shown on WDS
settings page.
S t a t u s
S t a t u s
g
g
Description
Set the expire time of WPA2 PMK (Pairwise master key) cache.
PMK Cache manages the list from the BSSIDs in the associated
SSID with which it has pre-authenticated. Such feature is
available for WPA2/802.1 mode.
Enables a station to authenticate to multiple APs for roaming
securer and faster. With the pre-authentication procedure defined
in IEEE 802.11i specification, the pre-four-way-handshake can
reduce handoff delay perceivable by a mobile node. It makes
76