Table of Contents
Advertisement
2-4-3. Zoom/Focus Adjustment
The image for the right eye and the image for the left eye are adjusted separately.
The adjustment procedure is the same.
1. Project the test pattern ("Frame Adjust"). (Refer to steps 1 to 4 in Section 2-4-1.)
2. Loosen the zoom lock screws and focus lock screws.
3. Adjust the image size by rotating the zoom rings.
4. Adjust the image focus by rotating the focus rings.
5. Tighten the zoom lock screws and focus lock screws.
Zoom lock screw (image for right eye)
Focus lock screw (image for right eye)
Focus ring (image for right eye)
Zoom ring
(image for right eye)
Zoom lock screw (image for left eye)
n
The 3D lens filters are not shown in the illustration for the sake of clarity.
SRX-T615
Zoom ring (image for left eye)
Focus ring (image for left eye)
Focus lock screw (image for left eye)
2-29 (E)
Advertisement
Table of Contents
