Grounded Tools: Tools With Three Prong Plugs; Double Insulated Tools: Tools With Two Prong Plugs - Chicago Electric 96692 Set Up And Operating Instructions Manual

Table of Contents

Advertisement

grounded tools: tools with three prong plugs

1.
this twin head worklight comes with a 3-prong plug.
2.
Tools marked with "Grounding Required" have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If
the tool should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user, reducing the risk of electric
shock. (see 3-prong plug and outlet.)
3.
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool's grounding system and must never be attached
to an electrically "live" terminal. (see 3-prong plug and outlet.)
4.
The tool must be plugged into an appropriate outlet, properly installed and
grounded in accordance with all codes and ordinances. The plug and outlet
should look like those in the following illustration.
(see 3-prong plug and outlet.)
3-prong plug and outlet

double insulated tools: tools with two prong plugs

1.
Tools marked "Double Insulated" do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian Stan-
dard Association, and the National Electrical Code.
(see outlets for 2-prong plug.)
SKU 96692
for technical questions, please call 1-800-444-3353.
the grounding prong from the plug. do not use the tool if
the power cord or plug is damaged. if damaged, have it
repaired by a service facility before use. if the plug will not
fit the outlet, have a proper outlet installed by a qualified
electrician.
outlets for 2-prong plug
Page 

Advertisement

Table of Contents
loading

Table of Contents