Specifications; Setup Instructions - Chicago Electric 96692 Set Up And Operating Instructions Manual

Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
Construction Materials
Tripod Leg Stand
Lens Type
Bulb Type
Switch Type
Adjust Height
Power Source (Input)
Power Consumption
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
Read the ENTIRE IMPORTANT SAFETy INFORMATION section at the
beginning of this manual including all text under subheadings therein before set
up or use of this product.
warning warning
note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
SKU 96692 for technical questions, please call 1-800-444-3353.
symbology

specifications

ABS Housing, Steel Tubing, Steel Bracket W/Rubber
Feet, Foam Handle Grip
4'3-1/2" H (To Top of Tubing)
Tempered Glass
Fluorescent - 2W, 120V, 60Hz (Q'ty 2 Included)
Red Covered Push-Button "On/Off" For Each LIght
Minimum: 3'4-1/2" H
Maximum: '6-3/4" H
120VAC/60Hz
Light #1 - 2W
Light #2 - 2W
Both - 0W
unpacking
set up instructions
turn the power switch of the tool to its "off" position and
unplug the tool from its electrical outlet before assembling or
making any adjustments.
V~
Volts Alternating Current
a
Amperes
No Load Revolutions per Minute
n 0 xxxx/min.
(RPM)
Page 7