HANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the Clamp Light in unexpected situations. SKU 35149 For technical questions please call 1-800-444-3353. ELECTRICAL SAFETY...
Page 4
Do not use the Stapler if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. SKU 35149 For technical questions please call 1-800-444-3353. TOOL USE AND CARE...
Page 5
Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.) Figure B SKU 35149 For technical questions please call 1-800-444-3353. Note: The Clamp Light has a Three Prong Plug.
Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using Protect your extension cords from sharp objects, excessive heat, and damp or wet areas. SKU 35149 For technical questions please call 1-800-444-3353. EXTENSION CORDS...
Light is clear of debris and obstructions which may bump the Light. Do not obstruct walkways or common areas with the cord. The Clamp Light is weatherproof but not waterproof. Do not submerge the Light in water. SKU 35149 For technical questions please call 1-800-444-3353. SPECIFIC SAFETY RULES Page 7...
Page 8
When unpacking the 150 Watt Portable Clamp Light, check to make sure parts on page are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353. Your Portable Clamp Light will require some minor assembly. The Light requires special conditions for set up and operation.
Page 9
Oil from your skin will drastically shorten the bulb’s life-span if not cleaned (with rubbing alcohol) before use. Handle with a soft, clean cloth instead. Insert the Phillips Head Bolt (3) and replace the Grid. SKU 35149 For technical questions please call 1-800-444-3353. Knob (3)
Page 10
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 35149 For technical questions please call 1-800-444-3353. Operation Inspection, Maintenance and Cleaning Q’ty...
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of ninety days from the date of purchase.