Miele G 7893 Operating And Installation Instructions page 56

Frequently asked questions
What if...
The "Recharge"
indicator flashes.
A few minutes after the
start of a program, the
"Fill/Drain" indicator
flashes, and the
program stops.
56
Possible fault
The water softener has run
out of salt.
Error message: F..E:
There is a problem with the
water intake.
Solution
Refill the salt reservoir.
Before addressing the
error:
– Turn the program
selector to f. The error
message is erased.
– Press the On/Off button
to switch off the
machine.
– Open the water valve
completely.
– Clean the water inlet
filters.
– The flow pressure at the
water connection is too
low. Contact a qualified
plumber for advice.
Then:
– Turn the washer on.
– Restart the program.