Chevrolet 2016 SS Sedan Owner's Manual page 48

Table of Contents

Advertisement

The 1, 2 SET, and
(Exit) buttons
on the driver door are used to
manually store and recall memory
settings for the driver seat, and
outside mirrors.
Storing Memory Positions
To store positions to the 1 and 2
buttons:
1. Place the ignition in ON/RUN
or ACCESSORY.
2. Adjust the driver seat and the
outside mirrors to the desired
driving position.
3. Press and release SET. A beep
will sound.
4. Immediately press and hold 1
until two beeps sound.
5. Repeat Steps 1 4 for a second
driver using 2.
To store positions to the
button and easy exit features,
repeat steps 1 4 using
your position for getting out of the
vehicle.
Manually Recalling Memory
Positions
Press and hold 1, 2, or
manually recall the previously
stored memory positions. Releasing
1, 2, or
positions are reached stops the
recall.
Automatically Recalling Memory
Positions (Auto Memory Recall)
If programmed in the Vehicle
Personalization Menu, the Auto
Memory Recall feature (Automatic
Transmission Vehicles Only)
automatically recalls the current
driver s previously stored 1 or 2
position when the ignition is
changed from OFF to ON/RUN or
ACCESSORY.
See Auto Memory Recall under
Comfort and Convenience in
(Exit)
Vehicle Personalization 0 117
To stop recall movement, press one
to store
of the memory, power mirror,
or power seat controls.
to
before the stored
.
ii
Seats and Restraints
RKE transmitters are not labeled
with a number. If your memory seat
position is stored to 1 or 2, but this
position is not automatically
recalling, then store your positions
to the other button or switch RKE
transmitters with the other driver.
Easy Exit Driver s Seat
If programmed on in the vehicle
personalization menu, the easy exit
feature automatically moves the
driver s seat rearwards to a preset
position when exiting the vehicle.
See Vehicle Personalization 0 117
Easy exit driver s seat automatically
activates when one of the following
occurs:
The vehicle is turned off and the
driver door is opened within a
short time.
The vehicle is turned off with the
driver door open.
To stop recall movement, press one
of the memory, driver seat,
or outside mirror controls.
47
.
ii

Advertisement

Table of Contents
loading

Table of Contents