Wen 70716 Operator's Manual page 5

4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d. Store idle power tools out of the reach of children. Do not allow anyone unfamiliar with the power
tool/instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp edges are less likely to
bind and easier to control.
g. Use the power tool, accessories, tool bits, and etcetera, in accordance with these instructions. Take into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended can result in a hazardous situation.
h. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
i. Children should be supervised to ensure that they do not play with the appliance.
5. Service
Have your power tool serviced by a qualified repairperson using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
5