Advertisement
!
How to Setup SNMP Community/Host/Trap
Users can use the following command to setup SNMP community/host/trap. The commands are listed as
below.
Command
$create snmp comm community <community>
<RW|RO>
$create snmp host ip <host-ip> community
<community>
$create snmp traphost ip <host-ip>
community <community>
How to Create VLAN
Users can use the following command to create VLAN. The commands are listed as below.
Command
$create vlan static vlanname <vlan-name>
valnid <vlan-id> [egressports <bridge
ports>]
D-Link Confidential
Description
Create SNMP community
Create a host to manage the device through SNMP
Create a host to capture the traps.
Description
Create VLAN
8
Advertisement
