I-Trac WT200B User Manual page 6

-----------------------------------------------------------------------------------------------------------------------------------------
Remove the back cover of WT200B. Insert the SIM card by sliding it into the card slot.
1
Put back the back cover.
Turn on the device:
2
Make sure to turn off the power before install the SIM card.
3
Make sure to deactivate the PIN code, so that the SIM card can operate without PIN protection.
4
Before install the SIM card to the GPS Tracker, please use a mobile phone to make sure the
SIM card can make & receive phone calls without problem.
5
Before install the SIM card to the GPS Tracker, please use a mobile phone to empty the SMS
storage of the SIM card.
3.3.2 Functional Parts：
There are 8 buttons on the gps tracker.
WT200B USER MANUAL
>>>>>>>>>
Page 6 of 18