I-Trac WT200B User Manual page 15

-----------------------------------------------------------------------------------------------------------------------------------------
5.2. Set APN
Send the SMS to the tracker as following format
Command format:
For example:
5.3.Set IP and Port
Send the SMS to the tracker as following format:
Command format:
For example:
5.4.Upload data in preset time
Send the SMS to the tracker as following format:
Command format:
For example:
http://www1.igpstracking.net/
5.5. Please go to
Enter the user name and password we provided.
After log in, please go to "Vehicle Manager-Vehicle List"
WT200B USER MANUAL
Command
Format 1:#802#APN###****##
Format 2:#802#APN#
name#APN password #0000##
#802#CMNET###0000##
#802#CMNET#abcdef#12345678#0000##
Command
#803#IP#port#****##
#803#58.64.205.22#8010#0000##
Command
#730#T#N#****##
#730#60#1#0000##
Remark
**** is the default password. Default:0000
Use format 2 if your APN requires APN user name and
APN user
APN password.
802 :
0000: password, default 0000
CMNET: APN, is gateway to connect internet, Each
country is different, please contact your SIM card provider
for APN name.
Remark
**** is the default password. Default:0000
803 :
0000: password, default 0000
58.64.205.22 900D Platform server IP
8010 900D Platform server software Port
Remark
**** is the default password. Default:0000
(1) T= Record location by interval, from 10 to 65535 in
the unit of second.
(2)N= Upload Record Location Quantity Per Time, from
1-50.
(3)Upload location data interval=T*N
N=0, close upload data by preset interval, the gps tracker
will reply "GPRS Timer Stop"
730 :
0000: password, default 0000
In this example: WT200B will send location every 60
seconds (1 minute), 1 location reports per time.
Page 15 of 18
Command code
Command code
Command code