Summary of Contents for I-Trac WT200B
- Page 1 WT200B USER MANUAL ----------------------------------------------------------------------------------------------------------------------------------------- Watch Tracker User Manual V6.2 WT200B Page 1 of 18...
-
Page 2: Table Of Contents
WT200B USER MANUAL ----------------------------------------------------------------------------------------------------------------------------------------- Table of Contents 1. Product Overview..........................3 2. Specification…………………………………………………………………………………….…4 3. Wiring Installation...........................5 3.1. Product Parts List ........................5 3.2. Precaution before Installation ....................5 3.3. Installation..........................5 3.4. Charge battery........................8 4. SMS Command List ........................8 5. Track by 900D web based tracking software…………………………………………………….14 6. -
Page 3: Product Overview
----------------------------------------------------------------------------------------------------------------------------------------- 1. Product Overview Thank you for your purchase of WT200B GPS Tracker. The WT200B GPS/GSM Tracker is a remote position device with build-in GPS and GSM/GPRS modules. It is a small size, high accuracy remote location tracking device. Based on GPS satellite, it provides accurate position information under dynamic conditions. -
Page 4: Specification
For safety reason, do not tell the other people your WT200B mobile number, without taking precautions. Otherwise, your privacy may be compromised along with other safety problem. -
Page 5: Wiring Installation
WT200B USER MANUAL ----------------------------------------------------------------------------------------------------------------------------------------- 3. Wiring Installation 3.1. Product Parts List GPS Tracker Unit USB Cable and Charger Battery User Manual(CD) 3.2. Precaution before Installation Check if all the parts are included. Prepare a SIM card for GSM communication. Use some other mobile phone to confirm that the PIN code has not been set and that it can dial out and receive telephone calls and SMS without problem. - Page 6 WT200B USER MANUAL ----------------------------------------------------------------------------------------------------------------------------------------- Remove the back cover of WT200B. Insert the SIM card by sliding it into the card slot. Put back the back cover. Turn on the device: >>>>>>>>> Make sure to turn off the power before install the SIM card.
- Page 7 WT200B USER MANUAL ----------------------------------------------------------------------------------------------------------------------------------------- Button Means 1.Press and hold 3seconds to turn on / turn off GPS tracker 2.Hang up incoming call Microphone Charging Jack 1. Interface Switch: 2. Press button D for 3 seconds, you can set date/language: Then press E or F to set...
-
Page 8: Charge Battery
4. 5 Two way voice communication for details) Speaker 3.4 Charge battery: The initial use of WT200B, make sure you please turn off WT200B and charge WT200B battery for 12 hours. Below is the battery charging status icon on the GPS watch screen: Charging:... - Page 9 3.Receiving alert message: All the alarm message(geo-fence, SOS, low battery alert) will be send to the authorize phone number. 4. After press SOS button, WT200B will send call the authorized phone number for voice monitoring, and send sms alert to the authorize phone number.
- Page 10 6660000 Description: 1. The GPS watch WT200B’s default GPS searching time is 30 seconds, means: WT200B will stopping searching for GPS signal if it cannot find GPS signal in 30 seconds. If you cannot get valid location report from WT200B, please first send sms command: #730#20#3#0000##...
- Page 11 WT200B USER MANUAL ----------------------------------------------------------------------------------------------------------------------------------------- then send the sms command: 666**** 2.Get the current location of the tracker, send this SMS or make a telephone call directly to the tracker and it will report its longitude and latitude by SMS with format as follows:-...
- Page 12 WT200B USER MANUAL ----------------------------------------------------------------------------------------------------------------------------------------- Fix: V STATE: SMS Note: If in the cold start and GPS no position, it will return to the void of information: eg: ERROR GPS GPRMC FRAME DATA BS: 27971054” ID: 353686009002030 STATE: SMS Google Earth and Google Download Google Earth from http://earth.google.com/.
- Page 13 WT200B USER MANUAL ----------------------------------------------------------------------------------------------------------------------------------------- Or you can use local map software on PDA or car navigation device to input the coordinates. Set geo-fence square #751#Radius#Sampling #751#500#5#22.5442N#113.91E#0000## Interval#Latitude #Longitude #0000## Description: When the tracker moves out of a preset square scope, it will send an SMS alarm to the authorized phone number for SOS ( “Authorization”)
-
Page 14: Track By 900D Web Based Tracking Software
WT200B USER MANUAL ----------------------------------------------------------------------------------------------------------------------------------------- Status:1—GPS tracker has invalid gps signal, geo-fence is open but cannot work normal Turn off geo-fence #760#0000## #760#****## The command to close geo-fence alarm. Example: #760#0000## Enable/Disable GPRS #904## #904## #905## #905## 1. Enable GPRS : #904## 2. - Page 15 For example: 730 : Command code #730#60#1#0000## 0000: password, default 0000 In this example: WT200B will send location every 60 seconds (1 minute), 1 location reports per time. http://www1.igpstracking.net/ 5.5. Please go to Enter the user name and password we provided.
- Page 16 SIM card: the SIM card phone number you put in WT200B. Terminal ID: On the WT200B, you can find the a white label writes “ IMEI". IMEI=Terminal ID . Terminal ID is 356823032239241 here. Click "Submit", and then you add the car successfully on the software 900D Attention: For 900D GPS Software, "Monitor"...
-
Page 17: Troubleshooting
GPRS function of WT200B is turned off Turn on GPRS function of WT200B. Incorrect IP address or PORT Get the right IP address and PORT and reset to WT200B GSM signal is weak Move the unit to a location with good GSM reception. - Page 18 WT200B USER MANUAL ----------------------------------------------------------------------------------------------------------------------------------------- If you encounter any problems when using our products, and cannot solve them by yourself, please contact our technical support team by writing an E-Mail to us. We will be pleased to help you. Page 18 of 18...