Track By 900D Web Based Tracking Software - I-Trac WT200B User Manual

-----------------------------------------------------------------------------------------------------------------------------------------
Turn off geo-fence
The command to close geo-fence alarm.
Example: #760#0000##
Enable/Disable GPRS
1. Enable GPRS : #904##
2. Disable GPRS : #905##
Set APN
Remarks:
1.If no APN username and password are required, just input APN only.
2. Use format 2 if your APN requires APN user name and APN password.
3. APN defaulted as 'CMNET'; APN is gateway to connect internet, Each country is different, please contact
your SIM card provider for APN name.
Set IP and Port
Remarks: IP is your server's IP and Port.
Track by Interval
In this example, the tracker will send location data back to your mobile phone every 60 minutes.
Read GPS Tracker
Parameter
Remarks: The command to read GPS tracker Set parameter
Read GPRS Set Parameter
Remarks: The command to read GPS tracker GPRS Set parameter
5.1. Enable GPRS
Send the SMS to the tracker as following format:
Command format:
For example:
WT200B USER MANUAL
Status:1—GPS tracker has invalid
gps signal, geo-fence is open but
cannot work normal
#760#****##
#904##
#905##
Format
1:#802#APN###****##
Format 2:#802#APN# APN
user name#APN password
#0000##
#803#IP # port #****##
#730# sampling interval T
# the number of upload
data each time N #****##
Set #901##
#902##

5. Track by 900D web based tracking software

Command
#904##
#904##
#760#0000##
#904##
#905##
#802#CMNET###0000##
#802# APN# APN user name#APN password
#0000##
#803#58.64.205.22#8010#0000##
#730#60#1#0000##
#901##
#902##
Remark
Page 14 of 18