Advertisement
The grill consists of two black grill grates and a grill burner. Only install the grill on the
left side of your cooktop.
1. Before installing grill components, be certain control knobs are in the OFF position.
2. Position the grill burner with mixer tube openings toward the orifices. Slide the
burner towards the orifices until the igniter is in between front and rear grill sections.
Lower into place until side openings are resting on the burner support pins.
3. Place the grill grates on the top of the cooktop.
NOTE: Before using the grill for the first time, heat the E-ven Heat
TM
grill burner to
remove the protective shipping coating. Heat the grill on Hi for 10 minutes and
use the vent system to remove any additional smoke during cooling.
1. Remove grill components once they are cool. Be sure control knobs are in the OFF
position.
2. Remove grill grates.
3. Remove grill burner.
14
Advertisement
