Advertisement
Quick Links
EXPRESSIONS
GAS COOKTOP
mmmJENN.AIR
408 WEST FOURTHSTREET, NORTH • NEWTON,IA 50208
IMPORTANT:
Installation should be performed only by a Jenn-Air Authorized Servicer or other qualified installer. Read safety
precautions in the Use & Care Manual before using this appliance.
(Dimensions shown in both inches and centimeters.)
GAS CONNECTION
AXIS
I
I
I
FLOOR
EXHAUST
I
OPTION
I
I
5.71 cm
36" 91.44cm
Minimum
Cabinet W idth
SELECT APPROPRIATE
DUCT CUTOUT
(SEE DUCTING
INSTRUCTIONS.)
CUTOUT
DIMENSIONS
ARE
CRITICAL
12%"
i
32.38
cm
Min. C learance
Required
17½"44.46 cm
1
_'_31
76 cm
1/2"
NPT EXT
THREADED
NIPPLE
1%"
4.44 cm
TO
CUTOUT
2"
mln.
Minimum cabinet to motor
clearance for cooling purpose.
INSTRUCTIONS
TO INSTALLER:
• Side Clearance - Unit may be safely installed as near as 2" (5.08 cm) from a side wall if space
limitations require. However, a side clearance of at least 6" is recommended
for optimum
ventilation.
SAVE THESE
INSTRUCTIONS
FOR FUTURE
REFERENCE
8101 P575-60
(04-04-00)
Advertisement
Related Manuals for Jenn-Air CVGX2423B18
Summary of Contents for Jenn-Air CVGX2423B18
- Page 1 408 WEST FOURTHSTREET, NORTH • NEWTON,IA 50208 IMPORTANT: Installation should be performed only by a Jenn-Air Authorized Servicer or other qualified installer. Read safety precautions in the Use & Care Manual before using this appliance. (Dimensions shown in both inches and centimeters.)
- Page 2 Location Of Your Jenn-Air Appliance Preparation Of Countertop The cutout in the countertop into which the appliance is to Locate this appliance away from combustible materials such be installed should be prepared according to the cutout as window curtains and combustible wall decorations. The dimensions given on page 1 of these instructions.
-
Page 3: Installation Of Appliance
Installation Of Appliance Connecting Appliance To Gas Supply Follow accompanying ducting instructions carefully. A QUALIFIED SERVICEMAN OR GAS APPLIANCE INSTALLER MUST MAKE THE GAS SUPPLY This appliance is designed to always be vented outdoors. CONNECTION. Leak testing of the appliance shall be This appliance should be ducted separately from other conducted by the installer according to the vented appliances. -
Page 4: Electrical Grounding Instructions
Connecting Appliance To Electricity WARNING Manifold Pi ELECTRICAL GROUNDING INSTRUCTIONS This appliance is equipped with a three-pronged grounding Appliance Pressure plug for your protection against shock hazard and should be --- /_ku 21LL Regulator, supplied Outlet plugged directly into a properly grounded receptacle. (Observe directionality of Gas Flow) Motor... - Page 5 Converting Appliance For Use With LP Gas WARNING Propane conversion is to be performed by a JENN-AIR AUTHORIZED SERVICER (or other qualified agency) in ALUMINUM VENTUR_ _5/16#NUT DRIVER accordance with the manufacturer's instructions and all codes and requirements of the authority having jurisdiction.
- Page 6 Installation of LP Orifice Spuds With a quarter, engage slot and rotate cap 1/8 of a turn counterclockwise. To remove cap, turn cap over and reinstall. Natural Setting LP Setting Figure 8: Conversion of Harper- Wyman Appliance Pressure Regulator After conversion, steps A and B have been completed, Figure check the appearance of each burners' flame at the Hi and Lo settings against figure 9.
- Page 7 Installation of Natural Gas Orifice To Convert Appliance For Use With Natural Gas Spuds If this appliance has been converted for use with LP gas, This appliance is equipped for electronic auto-reignition by each of the following modifications must be performed to means of a spark igniter located at the side of each burner.