Connecting Directly To A Wall Vent - Miele PT 5136 OS Operating And Installation Instructions

c Connecting directly to a wall vent
The best method of venting the dryer
is to connect it directly to the outside
wall of a room. Because the vented
air is blown directly outside and has
only a short distance to go, this
system is very efficient in terms of
time and energy consumption.
However, it involves boring through
an outside wall.
A wall pipe* and a flexible foam gasket*
must be used
(* optional extras).
A Before drilling into the wall:
. . . please read the installation
instructions supplied with the Miele
wall pipe,
. . . and study the following
diagrams.
View from above:
1. Wall pipe
2. Flexible foam gasket
Installation - extraction ducting
Side view:
1. Wall pipe
2. Flexible foam gasket
B Fit the foam gasket (2) onto the
connecting piece (1) on the wall
pipe.
C Push the dryer up against the wall.
43