Connecting Directly To A Wall Vent - Miele T 224 Operating Instructions Manual

Installation - venting
c Connecting directly to a wall
vent
The best method of venting the dryer
is to connect it directly to the outside
wall of a room. However, it is
necessary to insert the wall vent right
through the wall.
Because the vented air is blown
directly outside, and has only a short
distance to go, this system is very
efficient in terms of time and energy
consumption.
^ A wall pipe and a flexible foam
gasket must be used (both Miele
optional accessories).
A Before drilling into the wall . . .
. . . please read the installation
instructions supplied with the Miele
wall pipe.
. . . and study the following
diagrams.
View from above:
1. Wall pipe
2. Flexible foam gasket
34
Side view:
1. Wall pipe
2. Flexible foam gasket
B Insert the ring adapter (1) into the
wall pipe.
C Fit the foam gasket (3) on to the
connecting piece (2) on the wall pipe
and push the dryer up against the
wall.