Before Use; Protective Film; Care And Cleaning - Miele KFN 9753 ID Operating And Installation Instructions

Before use

Before using for the first time

Protective film

The stainless steel internal mouldings
and supports of the appliance have a
layer of protective film.
Stainless steel appliances also have a
protective film on the external surfaces.
^ Do not remove this foil until the
appliance has been installed or built in.

Care and cleaning

^ Wipe the stainless steel internal
mouldings and supports of the
appliance with the enclosed Miele
stainless steel conditioner immediate-
ly after removing the protective film.
Important! Each application of the
Miele stainless steel conditioner forms
a durable protective film that is stain-
and water-repellent.
^ Clean the inside of the appliance and
the accessories with lukewarm water
and then dry everything with a cloth.
10
Turning the appliance on
With the main switch you can turn the
appliance on.
^ Press the main switch on the right
side of the control panel.
The temperature display of the
refrigerator section lights up, and the
interior lighting comes on when the door
is opened.
Bars light up in the freezer section
display until the selected temperature is
reached.
The appliance begins cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
enable it to sufficiently cool.
Cool pack
Place the cool pack in the top freezer
drawer. The cool pack will be at
maximum performance after it has been
in the freezer for approx. 24 hours.
Turning the appliance off
^ Press the main switch on the right
side of the appliance until both
temperature displays go out.
If the cooling system does not turn off
the safety lock has been activated.