Advertisement
CARE & CLEANING
•
Before cleaning, disconnect the Panini
Grill from the power outlet.
•
Allow your Panini Grill to cool before
cleaning. The unit is easier to clean when
slightly warm.
•
Always clean your Panini Grill after each
use to prevent a build up of baked-on
foods. Wipe cooking plates with a soft
cloth to remove food residue.
For baked-on food residue, squeeze
some warm water mixed with detergent
over the food residue then clean with a
plastic washing pad or nylon washing
brush.
NOTE:
The cooking plates are coated with
a non-stick surface; do not use
abrasives.
Do not leave plastic cooking utensils
in contact with the Panini Grill while
cooking.
Cleaning the drip tray
Remove and empty the Drip Tray after each
use and wash the tray in warm, soapy
water. Do not use metal (or other abrasive)
cleansers or harsh detergents as they may
damage the surface.
Rinse and dry thoroughly with a clean, soft
cloth and replace.
14
Non-stick coating
Do not use sharp objects or cut food inside
the Panini Grill. Breville will not be liable for
damage to the non-stick coating where
metal utensils have been misused.
Cooking on a non-stick surface minimizes
the need for oil, food does not stick and
cleaning is easier.
Any discoloration that may occur will
only detract from the appearance of the
Panini Grill and will not affect the cooking
performance.
When cleaning the non-stick coating, do
not use metal (or other abrasive) cleansers.
Wash with warm soapy water. Remove
stubborn residue with a plastic washing
pad or nylon washing brush.
DO NOT IMMERSE ANY PART OF
!
THE BREVILLE PANINI GRILL IN
WATER OR ANY OTHER LIQUID.
CARE & CLEANING
Storage
To store your Panini Grill:
1.
Disconnect the appliance from the power
outlet.
2.
Allow the Grill to fully cool.
3.
Storage clip. We have referred to this as
the Adjustable Grilling Height Control clip.
Slide the Adjustable Grilling Height
Control clip towards the front of the
handle to the LOCK position so that
the top and bottom cooking plates are
locked together.
4.
Click the removable drip tray into place.
5.
Wrap the cord in the cord storage area
below the unit (see fi g 3).
6.
Store on a fl at, dry level surface.
15
Advertisement
