Cleaning And Care; General Notes; Appliance Front And Housing - Miele DG 1050 Operating Instructions Manual

General notes

Disconnect the appliance from the
electricity supply and allow it to cool
down to a safe temperature before
cleaning. Clean the whole appliance
and then dry it thoroughly after each
use.
Make sure the appliance is completely
dry before closing the door.
Do not use a steam cleaner to clean
this appliance. The steam could
reach electrical components and
cause a short circuit. Pressurised
steam could also cause permanent
damage to the surface and to
components, for which the
manufacturer cannot accept liability.
Do not use cleaners containing
alkalines, soda, acids or chlorides,
oven sprays, dishwasher cleaner or
abrasive cleaning agents, hard
brushes, scouring pads and cloths
or steel wool. You should also avoid
using sponges etc. which have
previously been used with abrasive
cleaning agents, as these would
damage the surface.
Do not use commercial cleaning
agents. Only use agents designed
for domestic use.
Do not use cleaning agents or
washing-up liquids containing
aliphatics as these could cause the
seals to swell.

Cleaning and care

Appliance front and housing

The appliance front and controls and
the housing can be cleaned using a
Miele E-Cloth, or a mild solution of hot
water with a little washing-up liquid
applied with a damp cloth. Wipe the
surfaces dry using a soft cloth.
Glas
For appliances with glass fronts, a
proprietary glass cleaning agent may
be used.
Stainless steel
Stainless steel surfaces can be cleaned
using a Miele E-Cloth or with a
proprietary non-abrasive cleaning
agent designed specifically for use on
stainless steel.
To help prevent resoiling, a
conditioning agent for stainless steel
can also be used.
Follow the manufacturer's instructions.
See "Optional accessories" for details
of accessories for cleaning and care.
33