Design Features - Rockford Fosgate PUNCH 40.2 Operations & Installation Manual

D F
ESIGN
1. Cast Aluminum Heatsink – The cast aluminum heatsink of the
Punch amplifier dissipates heat generated by the amplifier's
circuitry. The inherent advantage of casting provides a 30%
improvement of cooling over conventional extrusion heatsink
designs.
2. End Caps – The unique end caps conceal the wiring and input
cables, giving the amplifier a clean "stealth" look.
3. Speaker Terminals – The heavy duty, gold-plated terminal block
connectors (+ and –) will accept wire sizes from 8 AWG to 18
AWG. These gold-plated connectors are immune to corrosion
that can cause signal deterioration.
4. Power Terminals – The power and ground connectors on the
Punch amplifier are gold-plated and will accommodate up to 8 AWG
wire maximizing the input current capability of the amplifier.
5. REM Terminal – This gold-plated spade terminal is used for the
auto power/remote turn on of the Punch amplifier.
6. RCA Input Jacks – The industry standard RCA jacks provide easy
connections for signal level input. They are gold-plated to resist
the signal degradation caused by corrosion.
EATURES
3 8
Speaker
+ L –
Treble
9
LED
6 6
7 7
Left Left Right Right
Gain Input Input Gain
5 4
REM B+ GND
– 5 –
3
8
Speaker
+ R –
Bass