Uniden GDVR 4A Series Owner's Manual page 42

4. If you want to use that same configuration on another channel, select that
channel in the dropdown box for apply settings To. Then, select copy.
The configuration is now saved on the second desired channel.
5. If you want to apply the settings from one channel to ALL channels,
select all in the dropdown box for apply settings To. Then, select copy.
The configuration is now saved on all channels.
6. Select Exit.
Sensor Tab
This tab sets up a recording schedule for other motion sensors (not included).
(Default = All recording blocks selected)
1. Select a channel whose sensor recording schedule you want to set up.
2. Select the erase icon (
DO NOT want that channel to record.
3. Select one-hour blocks to remove from the recording schedule.
4. When you have the schedule set up as you want it, select apply. The
configuration for that channel is now saved.
5. To use that same configuration on another channel, select that channel
in the dropdown box for apply settings To. Then, select copy. The
configuration is now saved on the second desired channel.
6. To apply the settings from one channel to ALL channels, select all in the
dropdown box for apply settings To. Then, select copy. The configuration
is now saved on all channels.
7. Select Exit.
42
) and click on the 1-hour recording blocks you