Charging the Battery Pack
To charge the battery pack, place it in the supplied desktop
charger.
1.
Place the desktop charger on a flat surface.
2.
Insert the connector of the AC adapter into the charger
port on the back of the desktop charger.
3.
Plug the AC adaptor into a power outlet.
4.
Insert the radio into the desktop charger with the radio
facing the front, as shown.
Notes:
1 - When charging a battery attached to the radio, turn the
radio OFF to ensure a full charge.
2 - The estimated charging time of the battery with charger is
about 4 hours.
When charging a Stand-alone Battery:
10