Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pro Audio MT10
Summary of Contents for Pro Audio MT10
- Page 1 Manual MT10 Multi-purpose Speaker...
-
Page 2: Table Of Contents
• Operating Modes [1] MT10 Fullrange ......[2] MT10 with Subwoofer ...... -
Page 3: General Safety And Care Instructions
General Safety Instructions: Professional loudspeakers can produce harmful sound pressure levels. SPLs above 95 dB can permanently damage your hearing. Observe the relevant guidelines regarding working safety and health protection. To avoid physical and personal damages due to loudspeakers dropping or tumbling over, please make sure that the speakers stand safely on a firm ground. -
Page 4: Description And Use
Pin pair 2 is connected to the speaker. reversible cables. Combinations of MT10 and subwoofers, which are fed via a 4- pole lead, must be connected only to the non-marked SpeakON sockets! Never use the marked SpeakON socket that is arranged rotated by 180 degrees. -
Page 5: Operating Modes
Operation modes [1] MT10 Fullrange: DELTA 8.4-DSP The four loudspeakers are wired using 4-pole speaker cables. Each amplifier channel will drive one speaker. Four amplifier channels will be assigned. DELTA 8.4-DSP The eight loudspeakers are wired using 4-pole speaker cables. - Page 6 DELTA 8.4-DSP The six loudspeakers are wired using 4-pole speaker cables. The four speakers (1) and the two speakers (2) will each be driven by one dedicated amplifier channel. Two amplifier channels will be assigned. Channels three and four may be used to set up an identical configuration.
-
Page 7: Mt10 With Subwoofer
[2] MT10 with Subwoofer: DELTA 8.4-DSP The subwoofer is wired together with one top using 4-pole speaker cables. Likewise, the second top is wired using a 4-pole speaker cable. Each amplifier channel will drive one speaker. The two tops will be run in stereo, the subwoofer in mono mode. - Page 8 DELTA 8.4-DSP The subwoofer is wired together with one top using 4-pole speaker cables. Likewise, the second top and the fullrange speaker are wired using 4-pole speaker cables. Each amplifier channel will drive one speaker. Three amplifier channels will be assigned for the PA. The two tops are run in stereo, the subwoofer in mono mode.
-
Page 9: Mt10 As Nearfield Speaker
[3] MT10 as Nearfield Speaker Rear Rear Rear Rear DELTA 14.4-DSP DELTA 14.4-DSP DELTA 14.4-DSP The six subwoofers are wired on either side using 4-pole speaker cables. The nearfield speakers are connected to the amplifier with 4-pole speaker cables. The two tops are each connected to the pin-reversed socket of the nearfield speaker... -
Page 10: Drawings / Dimensions
Drawings / Dimensions:... -
Page 11: Technical Specifications
The relevant regulations must be observed and adhered to. EU Conformity Declaration: This declaration is valid for the MT10 loudspeaker of the manufacturing company ProAudio Technology GmbH. Included herein are all production items of the same type, as long as they have not been modified subsequently in structural or... - Page 12 Manual MT10 Multi-purpose speaker – 2012-11 ENG ProAudio Technology GmbH Hermann-Schwer-Strasse 3 78048 Villingen-Schwenningen Germany Phone: +49 (0) 77 21 / 99 81 96 - 0 Fax: +49 (0) 77 21 / 99 81 96 - 9 info@proaudio-technology.de www.proaudio-technology.de...
Need help?
Do you have a question about the MT10 and is the answer not in the manual?
Questions and answers