Download Print this page

Pro Audio SPLT.3 Instruction Manual

8ohm compression tweeter single 200w rms

SPLT.3 8Ohm Compression Tweeter

Single 200w RMS

Instruction manual

Table of Contents

Need help?

Do you have a question about the SPLT.3 and is the answer not in the manual?

Page 1 SPLT.3 8Ohm Compression Tweeter Single 200w RMS Instruction manual...
Page 2 Thank you for choosing Bassface. From the simplest connector to our top of the range ampliﬁer - every element of these products has been designed to give you the best possible performance for your money. Please take the time to read these instructions carefully as they contain useful and important information.
Page 3 Begin by selecting a suitable location for the installation of the tweeters. When you plan, try to keep the distance between the left tweeter and your left ear and the right tweeter and your right ear as similar as possible. This will improve the sound imaging. There is a trade oﬀ, however, as installing the high frequency speakers lower down will also tend to lower the level of the edges of the sound stage.
Page 4 you are using an active crossover on a dedicated feed to the tweeter, in which case please exercise care in setting the level. We recommend beginning at 5Khz for all our tweeters, and then experimenting downwards depending on the required volume level) When you make the connections, ensure that you use the same polarity left and right.