Poor Cleaning Results - Miele G 5570 Operating Instructions Manual

Poor cleaning results

Problem
The dishes are not
clean.
Glasses and cutlery
show streaks. The
glasses take on a
bluish shimmer; the
deposits can be
wiped off.
Frequently Asked Questions
Possible fault
The dishes were not
loaded correctly.
The program was not
powerful enough.
Stubborn but normal
soiling (e.g. coffee, tea).
Not enough detergent was
dispensed.
The spray arms are
blocked.
The triple filter in the wash
cabinet is clogged or not
correctly inserted.
The spray arm jets might
be clogged as a result.
The non-return valve is
stuck open and blocked.
Wash water will run back
into the wash cabinet.
The rinse aid dosage is
set too high.
Solution
See "Loading the
dishwasher".
Select a more intensive
program (see "Program
Guide").
Use the function "Adjust
Sensor Wash" (depending on
model, see "Settings").
Use more detergent, or
change the detergent.
Turn the spray arms and
rearrange the dishes if
necessary.
Clean the filter and insert it
correctly. Clean the spray
arm jets, if required (see
"Cleaning and care").
Clean the drain pump and the
non-return valve (see
"Cleaning and care").
Reduce the dosage (see
"Settings - Rinse aid").
51