Delay Start - Miele G 5570 Operating Instructions Manual

Delay start

The start time of a program can be
delayed. The start time can be delayed
from 30 minutes to 24 hours. The delay
is set in 30 minute increments.
When using the "Delay start"
function, make sure that the
detergent compartment is dry before
adding detergent. Wipe dry with a
cloth if necessary. Otherwise the
detergent could stick together and
not completely rinse out.
Do not use liquid detergent. The
detergent could leak out of the
compartment.
Additional options
^ Open the door.
^ Press the K button to turn the
dishwasher on.
The K indicator light comes on.
^ Select the desired program with the
"Program" button.
^ Press the , button.
The last delay start time will show in the
time display. The , indicator light
comes on.
^ Set the desired delay start time with
the , button.
If you press and hold the , button, the
time will automatically count up to
To start again at 30 minutes, press the
, button twice.
^ Close the door.
If, after you have set the delay start
time, you do not close the door within a
few seconds, the display will revert to
showing the program duration. You will
have to enter the delay start time again.
The time will count down to the
program start in 1-minute steps.
Once the delay start time has elapsed,
the selected program starts. The
display shows the remaining time, the
, indicator light goes out, and the
indicator light of the selected program
comes on.
24 h
.
39